Friday, August 20, 2010

Sugar Motor Testing Pt.2, Getting Sweeter

t
Art Applewhite's Cinco38 Prototype
Pizza Hut

My Tide Wave version with ISP
38-360 case for comparison

Tide Wave on 1st sugar flight.
Using Ultra-White recipe.

Tide Wave pouring on the sugar
and spinning hard.


A big update to the previous post.
Since that test took place back in February I've burned 3 more sugar reloads in the test series. Since the test stand is still broken [the new guage I want for it aint cheap], I went ahead
and flew them in an Art Applewhite 38mm Cinco Saucer clone, my Tide Wave, or in Art's prototype Pizza Hut Cinco38.
Since it's 1st flight I've trimmed down the wavy edges twice on the Tide Wave. The spin under power was fine by me, but the spinning causes recovery problems. I've also flown the Cincos on an Aerotech G64W reload and an ancient and suspicious single-use Aerotech 320Nt H145 manufactured in 1988. These 2 motors definitely bracket the sugars below in the medium H category.

The motor that blew the stand had Bi-modal KNO3 [an inspecific mix of powdered and granular], my usual opacifier
1% Lamp Black, plus 1% Red Iron Oxide. A very fast recipe.
The next 2 are the same as above but with 8% Titanium shavings added for sparks. One had fine sparks, the other coarser sparks. The mildest recipe, nicknamed Ultra-White, uses granular KNO3 and 1% Titanium Oxide as a white opacifier. The only test recipe not burned yet is Ultra-Pink. Same as Ultra-White above but with the addition of 1% RIO on top of the TiO2.

So far, except for the wrong nozzle incident, everything has worked well. Ignition with my now standard Copper Thermite ignitors has been a non-issue. The RIO sure is messy stuff but it
really does improve pouring viscosity, just as other sugar cookers have noted. I didn't doubt it, but wow, seeing it happen is amazing.

At this rate, I'll have to make more test loads by the time the test stand is repaired.
Aw shucks.

2 comments:

  1. I enjoyed the report, Ken. Saucers (and other saucer-like objects) are great testbeds.

    ReplyDelete
  2. I liked the expanded report too. :)

    ReplyDelete